AdventistSat GEOSATpro DVR1000ci Guía de instalación descargar pdf (Pagina 28)

CH # Channel Name Quality % Quality %

Record Signal Quality Sample Readings

Setting Time

Local time must be set before use.

Press MENU button

Select System Parameters

Press ENTER

Select Local Time/Timers

Press ENTER

Select Local Time/Timers

Enter Month/Day/Year and the

hour and minutes (24 hour)

Press EXIT 2 times

To verify that the dish is accurately aligned for reception of all

Adventist channels, press the CH/UP arrow to surf through all of the

preprogrammed TV and Radio channels and verify that the Signal

Quality is 70% or better on all channels.

If the Signal Quality is below 70% on any of the channels, place the

receiver on the channel with the lowest quality reading and make

very small movements to the dish elevation and/or the dish panning

side-to-side (azimuth) and /or LNBF rotation to peak the quality.

If the Signal Quality reading remains low after attempting any

combination of these adjustments, it is possible that the dish was not

checked for warping or corrected before assembling the dish.

AMC4 Channel List

Change to view only AMC4 Channels

Press CH LIST button

Press the (Orange) LIST button.

Press VOL ◄ until satellite name

AMC4/KU is displayed.

Press EXIT to view or listen to

available channels.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 38 39

Sin comentarios

AdventistSat GEOSATpro DVR1000ci Guía de instalación Pagina 28